ReSound VO961-DRW User Manual ReSound
Download File ===== https://bltlly.com/2tvnNy
How to Use Your ReSound VO961-DRW Hearing Aid
If you have a hearing loss, you may benefit from using a ReSound VO961-DRW hearing aid. This is a receiver-in-ear (RIE) hearing instrument that delivers clear and natural sound quality. In this article, we will explain how to use your ReSound VO961-DRW hearing aid, including how to insert and remove it, how to change the batteries, how to adjust the volume and programs, and how to clean and maintain it.
How to Insert and Remove Your ReSound VO961-DRW Hearing Aid
To insert your ReSound VO961-DRW hearing aid, follow these steps:
Hold the hearing aid behind your ear with the speaker wire pointing downwards.
Insert the dome or custom mold into your ear canal and gently push it until it fits snugly.
Tuck the retention wire behind the fold of your ear to secure the hearing aid in place.
Repeat the same steps for the other ear if you have two hearing aids.
To remove your ReSound VO961-DRW hearing aid, follow these steps:
Gently pull the retention wire out from behind your ear.
Grasp the speaker wire near the dome or custom mold and gently pull it out of your ear canal.
Hold the hearing aid in your hand and turn it off by opening the battery door.
Repeat the same steps for the other ear if you have two hearing aids.
How to Change the Batteries of Your ReSound VO961-DRW Hearing Aid
Your ReSound VO961-DRW hearing aid uses size 312 batteries. You should change them when you hear a low battery warning beep or when the sound quality deteriorates. To change the batteries, follow these steps:
Open the battery door by gently pushing it downwards with your fingernail.
Remove the old battery and dispose of it safely.
Remove the sticker from the new battery and insert it into the battery compartment with the positive (+) side facing up.
Close the battery door until it clicks.
Repeat the same steps for the other hearing aid if you have two hearing aids.
How to Adjust the Volume and Programs of Your ReSound VO961-DRW Hearing Aid
Your ReSound VO961-DRW hearing aid has a push button that allows you to adjust the volume and switch between different programs. To adjust the volume, follow these steps:
Press the push button briefly to increase or decrease the volume by one step. You will hear a beep for each step.
To return to your default volume setting, press and hold the push button for two seconds. You will hear a double beep.
Repeat the same steps for the other hearing aid if you have two hearing aids.
To switch between different programs, follow these steps:
Press and hold the push button for more than two seconds until you hear a melody indicating that you have switched to a different program.
The number of beeps after the melody indicates which program you are in. For example, one beep means program 1, two beeps mean program 2, and so on.
You can cycle through all your available programs by pressing and holding the push button again for more than two seconds.
To return to your default program, press and hold both push buttons on both hearing aids for more than two seconds. You will hear a double beep followed by a melody.
How to Clean and Maintain Your ReSound VO961-DRW Hearing Aid
To keep your ReSound VO961-DRW hearing aid in good condition, you should clean and maintain it regularly. Here are some tips:
Clean your hearing aid every day with a soft cloth or tissue. Do not use water, alcohol, or any other liquid or solvent.
Clean your dome or custom mold every aa16f39245